IntelliDox Calibration Station - Honeywell

- Enables bump test tracking, email notices and easy recordkeeping for improved compliance
- Performs the quickest bump test in the industry for increased uptime and no wasted calibration gas
- Enables the ability to change alarm set points, set a noncompliance indicator when a bump test is due, and adjust other parameters for maximum flexibility
- Easy setup with a network or USB drive — no tools required
- Expandable to five docking modules that can operate independently, while sharing power, network connection and calibration gas
- Easy data transfer — by Ethernet or USB — from docking module to computer
- Device management with Honeywell Safety Suite.
IntelliDoX Automated Instrument Management System
Get more from your gas detector with unmatched performance and customization. The IntelliDoX Calibration Station – Honeywell system combines smart docking modules and device management software to provide automated instrument management for compatible detectors, helping you drive productivity, reliability and efficiency.
Fast Instrument Management and Enhanced Productivity
The IntelliDoX Calibration Station – Honeywell System is easy to install, taking under 2 minutes from setup of a five‑module dock to the bump of your first instrument. Each module has its own operating system, LCD screen and internal pump allowing you to perform more than one operation at the same time. Whether you want to bump three detectors or calibrate others – you can get more done in less time.
Flexible configuration to meet changing needs
Configure the low and high alarm set points – plus other detector parameters – throughout the lifespan of the detector. So you can rely on your detector to always work the way you want it to.
IntelliDox Calibration Station - Honeywell System

- Industry-leading Fast Bump test that eliminates bottlenecks, while avoiding costly purge cycles that waste gas
- Connect up to five modules, each with its own LCD screen and keypad for independent operation
- Easy to set up with no tools required
- Easy to connect via Ethernet to a network
- USB port to easily configure dock module settings or retrieve data without network access
- Automated bump test and span calibration operation
- Device management with Safety Suite Device Configurator
- Modular nests for device changes
- Bump testing, calibration, configuration, and record-keeping support for compatible detectors.
- User updatable settings: Configure alarm settings, Display gas reading during alarm, Enable non-compliance indicator, Hibernate detector, Schedule bump test and calibration reminders, Transfer event logs, Time display preferences, & Update firmware
Size | 13.8 x 36.2 x 10.9 cm – individual docking module |
---|---|
Weight | 1.91 kg |
Power Supply | 12 V / 8.33A ITE Power Supply |
Real Time Clock | Provides time and date stamp |
Communications Method | Two-way infrared communication between docking module and detector |
Eternal Interface | 1 USB port |
Menu Navigation |
|
Automatic Tests | Automatic bump test to verify sensor responds to target gas |
Data Storage | 2 GB internal |
Pump | Independent pump in each IntelliDoX module Flow Rate: 350 ml/min |
Instrument Management System | Safety Suite Device Configurator or Fleet Manager II, version 4.5 or higher |
Ratings | EMC Directive 2014/30/EU |
Warranty | Two year warranty |
IntelliDox Brochure
View more information from the Honeywell Website
Delivered Across Australia & NZ Direct From Sydney, Melbourne or Perth Warehouses
Contact us
1300 189 146
Australia & New Zealand
sales@precisionsafety.com.au