Altair Pump Probe


The MSA ALTAIR Pump Probe joins a family of products with a pedigree of durability and functionality. A rugged unibody housing provides unsurpassed durability, including the ability to survive a 10-foot drop.

With a large, glove-friendly button for single handed use, the ALTAIR Pump Probe is designed for easy use in any work environment.

Flexibility to meet your needs

Users who occasionally need to use diffusion instruments for pumped applications. MSA ALTAIR Pump Probe is the ideal solution with sampling options using a sample wand or sample line of up to 50ft. With a universal design, the ALTAIR Pump Probe can be utilised with a number of MSA diffusion type portable gas detector instruments.

Designed with you in mind

The ALTAIR Pump Probe was  designed around your needs with a translucent cap for easy filter inspection, tool-free quick change components for simplified maintenance, and compatibility with our ALTAIR chargers.

Built on durability

Confined Space Entry - No Problem - Altair Pump Probe

The ALTAIR Pump Probe is a rugged sampling accessory for MSA gas detection instruments.

Capable of drawing samples from up to 15m away with standard sampling line, quickly convert diffusion instruments for use in remote sampling applications.

Visual inspection of filter and quick change components simplify maintenance. Rugged unibody construction provides unsurpassed durability and Li Ion battery ensures long run time even in cold weather.

Key Features of the Altair Pump Probe

  • Visual filter inspection
  • Quick change components
  • Tough over-moulded rubber armour
  • Dust- and water-tight IP65 construction
  • 3-year warranty
  • 30+ hour run time
  • Rechargeable battery
  • Compatible with Altair wall chargers, Altair 4/4X desktop/vehicle chargers
  • Intrinsically-safe

Quick Startup of the Pump Probe

(1) Press the POWER ON/OFF button and turn the ALTAIR Pump Probe on.
(2) Wait for Flow LED to flash GREEN
(3) Perform a flow check by blocking the inlet. Flow LED should turn RED indicating flow fault.
(4) Press the POWER ON/OFF button to reset and restart pump.
(5) To turn of the ALTAIR Pump Probe Press and hold the POWER ON/OFF button for about three seconds.


Altair Pump Probe Brochure

Delivered Across Australia & NZ Direct From Sydney, Melbourne or Perth Warehouses

Vie more information direct on MSA’s Website